Stop in for a cup of coffee
- Thread starter toolmanmike
- Start date
-
goldfish65
Well-Known Member
Saying prayers for your comfort, Mike. I bet you'll feel ten years younger once you heal up. Hey something I thought of, you might ask the Dr. if you could have some physical therapy. Someone here suggested that for me and I thought what for? But in retrospect I see it really would have helped me get my strength back. And the big plus I can think of is usually the therapists are very attractive and friendly. No need to point that out to your wife.
Our actual temps rarely break 100 here. But together with the humidity here it gets pretty nasty out on these 90+ days. Yesterday, right after I got to work, I had to walk across the roof around 3:30PM to switch something on the air units. Friggin HOT! Would not want to be the crew up there replacing the roof.Ya mean it cooled that much overnight? My brat-in-law text me the other night from Chandler about 11pm "It's 102 out there"
Replacing all the insulation and glued down black membrane...
73 dart custom
Well-Known Member
Looks good. A little shaved coconut on top?
73 dart custom
Well-Known Member
Yes lol. Had to make it a "healthy" breakfast!!!
Unconventional
Well-Known Member
When they re-attached my patellar tendon in my knee I was laying there in the staging lane waiting for the Demeral and kinda looking forward to it 
. Instead the nurse hands me a Sharpie, "Here mark the knee they are supposed to work on". "Ya mean they don't have it written down? What kinda place is this?" CUT HERE ~~~~~~~> gets scribbled on the right thigh . And no Demeral 
. I was so disappointed.
and kinda looking forward to it . Instead the nurse hands me a Sharpie, "Here mark the knee they are supposed to work on". "Ya mean they don't have it written down? What kinda place is this?" CUT HERE ~~~~~~~> gets scribbled on the right thigh . And no Demeral . I was so disappointed.
73 dart custom
Well-Known Member
Thigh???? Thought they were doing your knee!!!!
Lol. I need to have my valves ground. I drink plenty of 'tune up in a can' but I need a little more work.
Unconventional
Well-Known Member
Yeh, that would be cause for concern. Did they keep you awake so you could talk them through the procedure?When they re-attached my patellar tendon in my knee I was laying there in the staging lane waiting for the Demeral
73 dart custom
Well-Known Member
Ohhhhhhhhhhh!!!That's what the arrow ~~~~~> was for
That arrow gets rubbed off and you could be in big trouble. Might just pick something close by to cut on..That's what the arrow ~~~~~> was for
Unconventional
Well-Known Member
Yeh, that would be cause for concern. Did they keep you awake so you could talk them through the procedure?
They gave me some cocktail that knocked me out in 3 seconds. I didn't wake up until I was in the hospital bed 6 hours later.
Unconventional
Well-Known Member
Man o man that full moon was bright out there this morning . Been a while since I've seen one for all the fog shrouded nights we've had. Of course, now the fog is back
. Been a while since I've seen one for all the fog shrouded nights we've had. Of course, now the fog is back
Unconventional
Well-Known Member
It's Willys Wednesday. Gooood morning.
Will continue with my mower deck repair in a bit. I won't have the bearings and drive belt till probably Friday. So, over last 2 days, I took spindles apart. Pressure washed and wire brushed the inside of the deck. Did first coat of paint on rusted areas with whatever leftovers sprays I had in the cabinet. Got a can of black on the way home last night. Will spray that on outside. And might use up a can of brown on the inside.
Wow 8 hours sleep in a row!
Plans changed for today. I am inline for a Angiogram. No breakfast but I can eat what I want after.
When i had one, they put me on a treadmill and ran me like a dog, then inclined it when i was about ready to give up. “One more minute” they said. BS...
Ah yes. I have had a few of those. This will be a die injection and x ray to see and measure restrictions. If I need a bypass or two they will know exactly what and where. I thought the CT scan with contrast I had last month told that.
Toyota venza for rear wheel bearings. Textbook job, no big hammers,no air hammer. Just unbolt and install new ones. My kind of job.
Any direction spray cans. Just threw two cans that still were about half full in the trash. I was always pretty good about inverting the can and clearing the nozzle before putting a can back on the shelf. Cant do that with these cans. So I end up throwing out good paint...
One older style can of ACE brown was still good and got a first coat under the mower deck with that. Then topped with a fresh coat of black Rustoleum.
And what kind of gray galvanized paint did you find that looked best??
Any direction spray cans. Just threw two cans that still were about half full in the trash. I was always pretty good about inverting the can and clearing the nozzle before putting a can back on the shelf. Cant do that with these cans. So I end up throwing out good paint...
One older style can of ACE brown was still good and got a first coat under the mower deck with that. Then topped with a fresh coat of black Rustoleum.
Maybe this is more accurate? CT probably tells them you need it, but they save this for immediately before to fine tune what they will do.
-
