Stop in for a cup of coffee

-
I keep all the good old tips and change them out if they clog. Keefer hit it with lanolin spray after it will never hold the grass on it kind of like organic Teflon!
 
:soapbox:
Any direction spray cans. Just threw two cans that still were about half full in the trash. I was always pretty good about inverting the can and clearing the nozzle before putting a can back on the shelf. Cant do that with these cans. So I end up throwing out good paint... :BangHead:
One older style can of ACE brown was still good and got a first coat under the mower deck with that. Then topped with a fresh coat of black Rustoleum.
I've had terrible luck with Rustoleum's cans. Got two or three Rusty metal primers that are full but won't spray. :wtf:
 
I keep all the good old tips and change them out if they clog. Keefer hit it with lanolin spray after it will never hold the grass on it kind of like organic Teflon!
Rustoleum switched to some new fangled tip a few years ago. :BangHead:
Problem may be in the pickup tube
 
I've had terrible luck with Rustoleum's cans. Got two or three Rusty metal primers that are full but won't spray. :wtf:
They are usually fine when new. But after that its hit or miss if they will spray again. I even pull the tips off and blow through with air nozzle sometimes. I still think they may be the best for rust protection. But I much prefer Krylon for a nice finish. I have found them to consistently spray good.
 
And what kind of gray galvanized paint did you find that looked best??
Actual galvanized has a 'mottled' look that I don't know how you will get with paint. I think I painted mine with Rustoleum aluminum and then a very light coat of Krylon stainless steel or maybe nickel.

57F74065-3A54-4186-80A0-478C5607E130.jpeg
 
Actual galvanized has a 'mottled' look that I don't know how you will get with paint. I think I painted mine with Rustoleum aluminum and then a very light coat of Krylon stainless steel or maybe nickel.

View attachment 1715364978
I just need something to knock the chrome finish off. I really don't want to remove it.
 
Can you find a example of what you want it to look like Keith?
Mine is what it is.... Craig is trying to get rid of chrome look. 'we' think they were galvanized. From what I remember of mine it was a big flaky pattern something like this:

Hot-Dipped.jpg
 
That's definitely galvanized. Wonder if eastwood has something to do it?

Lanolin=wool oil amazing protectorate kind of clear compline.

10N783_AS01?$mdmain$.jpg
 
When they re-attached my patellar tendon in my knee I was laying there in the staging lane waiting for the Demeral :lol:and kinda looking forward to it :rofl:. Instead the nurse hands me a Sharpie, "Here mark the knee they are supposed to work on". "Ya mean they don't have it written down? What kinda place is this?" CUT HERE ~~~~~~~> gets scribbled on the right thigh :lol:. And no Demeral :mad:. I was so disappointed.
LMAO, when they did that to me I put a big dollar sign on. The nurse was not amused!
 
-
Back
Top