Yard Sale
I wanted to reuse as much as possible to help keep cost in check. I really did not want to run the 3 grove crank pulley, after some inspection I realized I could loose some extra meat from it. I used a large socket as a base to scribe a nice line on the ID of the pulley. I carefully and slowly cut at the mark with a cutoff wheel. Im pleased with how it turned out
I also pulled my distributor apart and installed a timing limiter plate and one spring from an Old Mr Gasket recurve kit (used one factory light spring). Pretty straight forward install and gave me a good chance to inspect the distributor. I dropped it on the 18 degree slot.
I wanted to reuse as much as possible to help keep cost in check. I really did not want to run the 3 grove crank pulley, after some inspection I realized I could loose some extra meat from it. I used a large socket as a base to scribe a nice line on the ID of the pulley. I carefully and slowly cut at the mark with a cutoff wheel. Im pleased with how it turned out
I also pulled my distributor apart and installed a timing limiter plate and one spring from an Old Mr Gasket recurve kit (used one factory light spring). Pretty straight forward install and gave me a good chance to inspect the distributor. I dropped it on the 18 degree slot.
