2019 summer race.... Jadaharabi vs 318willrun

who's got this race ?

  • J par - hard to beat a guy that has 4 of everything

    Votes: 6 12.5%
  • Jadaharabi - are you kidding me? this guy is working on a stock eliminator

    Votes: 23 47.9%
  • 318willrun - no plan, other than brain cramps thinking of one

    Votes: 19 39.6%

  • Total voters
    48
-
You do know that jabs 360 "stock" motor is nicknamed "Sneaky Pete" correct?
and that could be, and maybe I'll be at the end of a Jaba Joke... LOL. Maybe I'm going to race an all-out stock eliminator motor with a 8" converter backed by 4.88's. LOL. And if so, I wouldn't raise an eyelash. No secrets on my car. I have confirmed the open 2.76's, stock 904 and converter, and my best assessment of the remanufactured engine. He'll have to beat the car I'm building for me..... :)
 
Last edited:
Of course jab will get the holeshot on you we all know that's going to happen, but do you really want to see his tail lights continue to fade in the distance all the way down the track?
I hope it comes out of the hole faster than it's coming out of the barn.... LOL I don't know how we all "know" his car will holeshot mine.... LOL. It should, but it may or may not is the correct way to say it I do believe.....
 
I hope it comes out of the hole faster than it's coming out of the barn.... LOL I don't know how we all "know" his car will holeshot mine.... LOL. It should, but it may or may not is the correct way to say it I do believe.....
I don't care who you are that was funny!
Your Gear's have a 2, his gears have a 4...
 
More like a 318hasvalvesthatwillfly Eliminator motor...:thumbsup::D
Now here is a thought I've been pondering. My Magnum heads would give me a little better ports, little bigger valve, smaller valve stems, more lift and faster ramps on the cam due to the 1.6 rocker ratio, more compression because it's closed chamber (though open chamber heads flow better). There might be a shot at getting into 12's just with these heads....????? Imagine a 2.76 geared, stock tranny/converter, stock 360 with mag heads clicking a 12.99 ???
 
Last edited:
Now here is a thought I've been pondering. My Magnum heads would give me a little better ports, little bigger valve, smaller valve stems, more lift and faster ramps on the cam due to the 1.6 rocker ratio, more compression because it's closed chamber (though open chamber heads flow better). There might be a shot at getting into 12's just with these heads....????? Imagine a 2.76 geared, stock tranny/converter, stock 360 with mag heads clicking a 12.99 ???
You'll need a more cam to do it...
 
You've been able to you just didn't want to because it was too hot....
Today and tomorrow were looking at dangerous heat advisories. They were predicting 115* heat index. So it won't be tomorrow either.
 
Today and tomorrow were looking at dangerous heat advisories. They were predicting 115* heat index. So it won't be tomorrow either.
The snow is too deep it's raining too much it's too hot out...
Where have I heard this before...:rolleyes:
 
The snow is too deep it's raining too much it's too hot out...
Where have I heard this before...:rolleyes:

How can you fight global warning? It affects everything including brain waves just ask al bore while he lives in his beach side mansion and flys all over the world in his big fuel guzzler jet.
 
The snow is too deep it's raining too much it's too hot out...
Where have I heard this before...:rolleyes:
LOL..... I'm NOT paying 50 bucks for gas, entry fee, chili cheese fries, to sizzle and sweat and ...... swamp butt :D
HOWEVER.... if ya pull up in front of my house and I'll endure a trip out of town...... :poke:
 
Well if we make it to the track on Sunday we're definitely taking our old motorhome. At the very least it has working air conditioning...
 
Those 596 heads shaved .060, 273 rockers, a solid lifter 480-ish lift with as much duration as your comfortable with..
THEN...
Maybe...
LOL...… Well, the original plan was 3.23's, not 2.76's. before the season ends, I'll be in the 12's....
 
-
Back
Top