Holley/Demon Carb stumble

If your ordering parts make sure to get a power valve plug for the rear, along with the notched float and jet extension kit. Also make sure you have those plastic vent baffles/whistles on both blocks. Another thing to verify is that the bowl vent tubes are not up tight against the air filter lid.

Parts are order!
I have 1/4" between the top of the air filter and a straight edge. however My air cleaner lid is domed and give me a total of 1 inch of air clearance.
Not a problem but, something i would have never thought about or considered to be a problem. :thankyou: