Found a trick to install torsion bar boots

Had my front end apart to remove the oil pan and started to put it back together. As we all know these boots can be a real pain in the behind to stretch over the hex in the torsion bar.
Here is what I did to help that along.
I started with a 3/4" long socket, then pushed it over the socket onto a 7/8" socket, then onto a 1" socket to a 1 1/6" then last onto a 1 1/4" socket. The 1 1/4" fits over the torsion bar hex.
Put the socket over the hex on the torsion bar and push the boot over to the bar.

Granted it is tough to do so use some WD-40 and push hard. I used a 1/2" extension in the vise and put the sockets on it, hex side down.

Hope this helps and sorry if it is a repeat.