Qa1 upper control arm and moog offset bushing help

kursplat said
1: doesn't matter which QA1 you have, the vertical center line for both ball joints are in the same place.
2: why are you so set on getting neg to pos camber? everyone else that's had one of these cars for the last 40 years has been trying to get neg camber, and that's why there's a market for these control arms.
3: if your out of height adjustment on one side something is wrong. you need to start from scratch again. to get more help here your going to need to list everything you've done to the front suspension on this car. T-bars, control arms, adjustable strut rods, ect
4: the moog bushings will not fit those arms

I’m working on sorting this out will post when I find out what’s going on with the driver corner. I don’t want negative camber at the drag strip. Straight line needs straight wheels!!! What good is a adjustable suspension if you can only stay in negative camber. I want neutral or positive adjustment abilities like every other Abody out there. How do you know the moog will not fit in the qa1? Own a set? Have you tried? Waiting for my offset bushings and I’ll let everyone know if they fit in the qa1 arms