ok here’s my problem, my 66 has 14” wheels and the 9-3/4 poverty cap. I want to use a 15x7 wheel but the wheels I have are the smaller 8-3/4 (later model) and bigger 10-3/4 circle (the diameter of those nubs that hold the cap on). Was there a wheel made in 15” that had the middle size nubs? Maybe in the 63-66 years? I didn’t see anyone who made aftermarket ones.
15” wheel question
- Thread starter Ceedawg
- Start date
-
Mopar didn't make 15" wheels for small bolt cars. You will need to contact places like Wheel Vintiques and ask if they have centers to make it happen. There is a guy that vends at The Nats that goes by The Wheel Guy that combines centers and hoops to produce steel wheels in different widths.
Last edited:
Alaskan_TA
Well-Known Member
Yes, I have seen them on mid-1960s 1/2 ton pick ups if you have installed the larger bolt pattern axles & hubs?
There is also a guy selling centers that can be welded into 15" hoops, photos & information at https://board.moparts.org/ubbthread...h-dog-dish-cap-wheel-centers.html#Post2412794
There is also a guy selling centers that can be welded into 15" hoops, photos & information at https://board.moparts.org/ubbthread...h-dog-dish-cap-wheel-centers.html#Post2412794
Those are big bolt wheels though. The OP has small bolt.
What about the Wheel Vintiques available here? Wheels - 5 x 4 in. Wheel Bolt Pattern (app) I see hub cap bumps but they may not be the correct dimension.
duster2
Well-Known Member
Thanks Frank. I knew you were from the Midwest. I think I have one of you business cards around if I would look.
-
