Front Steering Knuckles on an early A Mopar

Members. Turns out that the Early A Steering Knuckles are, indeed, side specific. There are, from top to bottom, on the bolt holes, a difference as shown in the pics. The wider spacing will go to the rear and will match with the backing plates. I had the wider spacing to the front.....wrong. Thanks to @65dartcharger for the input on this one. This was easily overlooked by me during my assembly, and it cost me a few bucks at the alignment shop....along with the time today to redo switching them around. Lesson learned, mark the parts, and keep good notes.....advice for me. Thanks to all for their input and advice....much appreciated. sgrip65