Unstoppable Coolant Leak
I took the intake off and cleaned the gasket surfaces. I set it back on the heads and it will rest on the China walls before touching both heads, and I can get a little over .030" of clearance at both ends and the middle when it's butted up to the other head. I'll check it with clay tomorrow and see how that checks out.
I took the intake off and cleaned the gasket surfaces. I set it back on the heads and it will rest on the China walls before touching both heads, and I can get a little over .030" of clearance at both ends and the middle when it's butted up to the other head. I'll check it with clay tomorrow and see how that checks out.
