Transmission to smallblock support brackets pictures needed

They both go on with the rounded side towards the engine, so take both under there with you and find out which one goes on with the correct angles to the block and bell because the angles on the ends are different between the two.
Pretty sure one is shorter than the other also, but I can't remember which side.
@lee g

The flatter end goes to the block and the more closed in end goes to the two biggest bolt holes toward the bottom of the bell that are not threaded.
That end uses a bolt and nut.
Also note that some headers do not allow one of the braces to go back on.
(Drivers side I'm thinking)