SS Springs on 75 Duster

Working on rear struts...pain in ***...lol

Removed the rear firewall ......eye ball where the rear frame rails were in relations to the rear seat support...and cut part of it out....near the top by the package tray...placed rear strut on main hoop to get idea where the rear plates need to go.....ended up cutting 6 inches off the strut...got plates on rear frame rail and clamped it down to make sure the strut fit....ok...good to go...
welded in plate.....switched welder from 220 to 110 to keep from burning through floor pan.......one down...

moved over to the passenger side...again...cut 6 inches off struct...eye balled where the 1st plate was then set strut on main hoop.....needed to move plate forward an inch or two...clamped it down...tach welded it.....began to burn it in...bingo out of gas....i thought I had enough to do that last plate.......

my oldest daughter was there glass beading her 2 barrel intake for her /6 63 valiant wagon......we head out to get a new bottle.....eat lunch ...turkey sandwich....I am done for the day.....lol