[FOR SALE] Edelbrock Carb + Doug's small block headers

-
Status
Not open for further replies.

Deceus

Well-Known Member
Joined
Sep 10, 2014
Messages
384
Reaction score
123
Location
Va
Rating - 0%
0   0   0
Contact seller
Location: Harrisonburg, VA 22801

Doug's D453 small block headers for A, B, E body mopars. Please check double check fitment before buying these. They were on my 318 for ~200 miles before I switched over to a full TTI setup. They were ceramic coated black by a local shop using Cerakota. $350

c_oc=AQkGFljcRzWFaDLraI5HIXD3QAefJzVsRCf9giNXqFKabIuvYW51-lpG9fQLvpSc42U&_nc_ht=scontent.fric1-2.jpg


c_oc=AQkvdZYQWoxFg5UGqNvH_2_psj373mkKsS1punoTUvd5-lX1YxpSnfMgAab537yIkGg&_nc_ht=scontent.fric1-2.jpg



Edelbrock 14053 Carb 600cfm, calibration kit, electric choke and single line feed. Choke was never installed and everything else has less than 500 miles on it before I swapped it out for a Sniper EFI setup. Was absolutely perfect for my street performance 318 except for autocrossing. $300

c_oc=AQnYhExf8A9vzBSsU5PckIY3ROAODi5HsYQbrjzJ_IHW_ZVM6e8ub7vUzXpIklIIHTM&_nc_ht=scontent.fric1-1.jpg


c_oc=AQnCvZecB1wSX2T65wajK0XIcq8ZBQH2pWcKMEb1q29pJ34goc6YLPNFUXrXws044RA&_nc_ht=scontent.fric1-1.jpg


c_oc=AQlBFJsIR2pASsKMFWD0AL4e00aVsJFVYZCiLDmSnGK0FHffaDOQY4e3Jac4zfuoVm0&_nc_ht=scontent.fric1-1.jpg
 
Headers are sold! Carb still remains.
 
$275 for the Carb and accessories
 
"IF" u don't get any bites for carb & acc. !
I would offer $200 shipped for it ! 96750
I understand its a little low , but I will be taking a chance and don't want to spend more that that !
Mahalo, C
 
what was the problem with auto-x? floats not behaving?

Your guess is probably better than mine. Engine was just dying on me during really hard braking/cornering. Nothing that would ever effect it on the road but a definite issue for what I was doing. Ran great on the street though and fired up better than even my Sniper unless it was below freezing.
 
Last edited:
Status
Not open for further replies.
-
Back
Top