Holley/Demon Carb stumble

Cudafever said
So took my sunglasses off and put my reading glasses on and set both bowls dead nuts center in the bowl. had to raise both up a little with the front needing the most adjustment.
No bog no pop or bang and i ran it past the finish like to hit my shift light in 3d gear, NOPE no bang!!!!. Worked great and did so the rest of the day. 86.3 mph, 7.89, and a 1.736.

Glad you were both dogged and methodical enough to work this through. Especially being willing to go back to the beginning. Not many folks like it when I say start with the fuel level. And in your case it meant going back to the delivery system.

Glad you were willing to test what @PRH was suggesting.

Cudafever said
OK now for the Proform metering blocks. I just threw them on! didn't clean or check orifice sizes just threw them one

Now think how much better it will run when you make them right. :poke:
Just bustin on you. Glad they worked OOTB.
If you do decide to experiment with them, I'd start with the e-holes, and a logger or gopro on the AFR will help because that stuff happens quick. And if you don't want to experiment, that's cool too.
:thumbsup: