Moog LCA bushings

I know this has been covered before but, wanted to give a heads up. I had ordered LCA bushing from rockauto, two boxes came, one made in Mexico one made in USA. The made in USA part was mismanufactured and would allow the pivot pin to move nearly freely after being installed. We had to remove it, get another and reinstall. Took a ton of extra time.


TLDR Moog quality is poor on this part, luck of the draw


EDIT: forgot to mention, the parts store moog made in MX bushing also had an issue. the center sleeve wasn't centered in the bushing and was closer to one side then another. luckily we checked them before taking it