I will adjust the switch and let you know how it works. In the mean time the starter does not stop so I guess I need to figure that out as well. The starter stops but only when I turn off the key otherwise it seems to keep running. maybe the Bendix is stuck?
easy way to test if it is starter or relay or ignition switch is to pull the ignition wire from the starter relay by the battery ( yellow I think but you should varify)
have someone turn key to start
once started and starter motor is still engaged, pull ignition switch wire from relay, if starter disengages most likely ignition switch
if the starter does not disengage next test would be to remove the wire going from starter relay to the starter (not the wire from battery to starter)
have someone turn key to start
once started and starter motor is still engaged, pull wire going from starter relay to the starter, if starter disengages most likely starter relay
lastly you could SAFELY tap on starter motor Bendix and see if it disengages.
