Procar Rally Seats In 1966 Barracuda Interior
@rustyfish You're right, it doesn't make any sense that I hit the disagree button. I did not do it intentionally. I was browsing on my phone and must have accidentally hit the button. I would have never known if you didn't notify me. I have unchecked the disagree. Please accept my apologies.
By the way, I have grafted aftermarket OEM cloth seats from a Mazda to my '63-'65 seat tracks. Seats are really comfortable but are even a little high for me (5'9"). I would like to have them and inch or two lower. I did this 11 years ago and forgot how I grafted them on. So I went out to take couple of pix to show you. And while looking at them I realized that i should be able to lower the seats at least an inch using the seat mounting bolt holes in the brackets.
I mounted them to the '63-'65 seat tracks using 1.5" square tubing. Horizontal bolts to the '63-'65 seat tracks and vertical bolts to the grafted seat's tracks.
Since my grafted seat tracks are within the '63-'65 seat track width, I can lower by loosening the horizontal bolts and slide the seat forward and down, then re-tighten.
Hope this give you some ideas.
@rustyfish You're right, it doesn't make any sense that I hit the disagree button. I did not do it intentionally. I was browsing on my phone and must have accidentally hit the button. I would have never known if you didn't notify me. I have unchecked the disagree. Please accept my apologies.
By the way, I have grafted aftermarket OEM cloth seats from a Mazda to my '63-'65 seat tracks. Seats are really comfortable but are even a little high for me (5'9"). I would like to have them and inch or two lower. I did this 11 years ago and forgot how I grafted them on. So I went out to take couple of pix to show you. And while looking at them I realized that i should be able to lower the seats at least an inch using the seat mounting bolt holes in the brackets.
I mounted them to the '63-'65 seat tracks using 1.5" square tubing. Horizontal bolts to the '63-'65 seat tracks and vertical bolts to the grafted seat's tracks.
Since my grafted seat tracks are within the '63-'65 seat track width, I can lower by loosening the horizontal bolts and slide the seat forward and down, then re-tighten.
Hope this give you some ideas.
