Not charging after MSD 6AL installation.

Any luck? I'm following the thread because I'm having a similar issue. I don't mean to hijack your thread.

I have a 69 valiant, dropped a 408 stroker in it. Added the FBO 4 seconds flat electronic ignition - distributor, coil, ecm, a vintage looking electronic vreg (wanted to keep a stock look so i kept the ballast resistor too and turned it into a jumper/splice). The alternator is a 60A square back that I tested with the v reg to make sure it was working (will upgrade to a powermaster 100A as soon as I can) Also tested the brand new battery. As for other mods, I put a set of dual fans out of a ford mystique with a dakota digital timer and I had to put a mechanical fuel pump (small nos/holley style) as the builder didn't put the essentric in for the mech pump. I also did an ameter bypass. Not running a stereo, the fan or anything else right now. I'm getting less than 10 v at idle. All my grounds are good, all my wiring related to the charging system is new (the harness is old).

Where does one start trouble shooting? My automotive electrical skills are novice at best.