Stroker specific cams?

DrEamer said
As far as the EFI goes, Edelbrock recommends a minimum of 8 inches of vacuum at idle, and have a 3 settings for cam based on duration. It seems fairly forgiving to a point, but I want to keep the duration under [email protected] for good measure. I am spending some time on their forum to see what other users are running for cams.

What is interesting is Comp uses 114 lobe separation and 8 degree duration separation on the linked cam. I'm not sure if it has more to do with it being a stroker cam, or that the XFI lobes require it. The research continues.

Interesting. So as long as you have 8 inches of vacuum the EFI won't care? If that's the case, that should be easy.

Did you ever post your heads and intake manifold??? Because 232 at .050 unless your heads are well prepped W2 or better is going to put peak power at 5200. Maybe. And that to me is a waste.

Again, this points back to a custom cam. And I can't see the 114 LSA ever unless you have a killer set of heads. But Comp and I (and many others in the cam world) will never agree on the LSA issues.