Wanting to purchase new front hub bearings

oldmodlover said
As title says.
Got to buy new front bearings and races. ( Cone and cup to the purists)
Not necessarily looking for cheapest nor most expensive. Car is going to be a daily driver. Mainly best value for my investment.
I know l will get opinions from one end to the other so ultimate decision will be mine but....
What brand / make / " kit off evilbay" , local parts store, ....etc do you suggest ?

I just did my front bearings and seals on the front of my 63 Dart. I went to NAPA and got skf bearings and seals. To my surprise they had everything in stock. The price was good and they have a good reputation. Make sure to get new seals. If you haven't replaced them before there is a notch on the inside where the bearing race seats in the hub to use a punch to hammer or press the old one out with a punch or drift. To install the new ones I didn't have access to a bearing installation tool so I found a large socket the same size as the hub opening and hammered it in with that (press would be preferred method, but mine wasn't accessible at the time). Also make sure to clean everything good and use a decent quality grease to add longevity to the life of the new bearings.

Timken would have been my preferred bearing of choice but availability was an issue and pricier as well