1968 barracuda formula S fender emblem locations.
OK here you go. First the passenger side measurements which are just slightly different than the drivers side. Measuring from where the fender meets with the door first hole for the Barracuda script is 3 3/4" second hole is 6 5/8" third hole is 9 5/16" as for the Formula S holes again from where the fender meets with the door top hole is 6 1/4" bottom hole is 6 3/8" now measuring from the top of the fender the Barracuda script is first hole closest to the door is 9 1/2" down the second hole is 9 5/8" down and the third hole is 9 5/16" down for the formula S emblem again measuring from the top of the fender top hole is 11 1/2" down the bottom hole is 13" down end of the passengers side. Drivers side measuring from where the fender meets the door Barracuda script first hole is 4 1/16" second hole is 6 3/4" and the third hole is 9 3/8" the formula S badge top hole is 6 3/16" and the bottom hole is 6 1/4" now measuring from the top of the fender the Barracuda script first hole closest to the door is 9 9/16" down the second hole is 9 5/8" down and the third hole is 9 3/8" down as for the Formula S badge the top hole is 11 1/4" down and the bottom hole is 12 3/4" down. All the holes are the same size a 7/32 drill bit fits snug. Look at the pictures hope this helps you out. To many pictures so the next shot is of the drivers side.
Good Luck
Bob
OK here you go. First the passenger side measurements which are just slightly different than the drivers side. Measuring from where the fender meets with the door first hole for the Barracuda script is 3 3/4" second hole is 6 5/8" third hole is 9 5/16" as for the Formula S holes again from where the fender meets with the door top hole is 6 1/4" bottom hole is 6 3/8" now measuring from the top of the fender the Barracuda script is first hole closest to the door is 9 1/2" down the second hole is 9 5/8" down and the third hole is 9 5/16" down for the formula S emblem again measuring from the top of the fender top hole is 11 1/2" down the bottom hole is 13" down end of the passengers side. Drivers side measuring from where the fender meets the door Barracuda script first hole is 4 1/16" second hole is 6 3/4" and the third hole is 9 3/8" the formula S badge top hole is 6 3/16" and the bottom hole is 6 1/4" now measuring from the top of the fender the Barracuda script first hole closest to the door is 9 9/16" down the second hole is 9 5/8" down and the third hole is 9 3/8" down as for the Formula S badge the top hole is 11 1/4" down and the bottom hole is 12 3/4" down. All the holes are the same size a 7/32 drill bit fits snug. Look at the pictures hope this helps you out. To many pictures so the next shot is of the drivers side.
Good Luck
Bob
