QA1 strut rods hitting sway bar end links

Just move the upper sway bar link bracket off the shock bolt straight over to the outside of the control arm and weld er on. It appears that the top of the link needs to go that way anyway. You may need to trim a little off that top folded corner to get the bracket to fit, but that won't hurt a thing.

Also, the strut rods are not to be used for changing alignment specs. That is totally incorrect. Because of the nature of the lower control arm bushings, pulling or pushing on them from the adjustable strut rods will cause them to bind and prematurely wear the bushings out. A lot of people thing the adjustable strut rods are adjustable so that caster can be adjusted. That is not true. They are adjustable simply to more zero in on their correct position and that's all.