Stroker specific cams?

mullinax95 said
You might be interested in Hipotek's cams. I have ran two.. one for NA 408 and now a supercharged 408. Both cams utilizing fuel injection. The NA cam was a Comp XFI 230/236 .576/.571 on a 108LSA. Tuner was able to tune my PCM to work with the 108LSA. I asked first before buying the cam and he said it would be no problem. Never noticed any brake issues since I have power brakes or any EFI issues.

Had plenty of torque down low and horsepower up in the high revs. Fairy rough idle. My shift points are set at 6200 RPM. This cam worked great! This is in a 03 reg cab dodge ram. Never have dynoed it but want to.
IMM engine
EQ heads/PAC beehive springs
EFI intake
long tube headers
58mm throttle body
PRW roller rockers
Full forged rotation assembly

Thanks for the info, I just went over your build thread which leads me to a few questions. How long did you run the XFI cam? I am a little concerned with their long term durability of the springs with the aggressive ramps. Brain noted earlier in this thread that he though the ramps made the valve train noisy, so wondering about that as well. Last question, are you still running the melling lifters, and how are they holding up if they are still in the truck. I had contacted Richard awhile back, so he is on my radar as well as an option.