Alternator bracket pic request

Do you have a single or double pulley alternator? If double and you are not using two belts on the alternator (as in your rank pulley is for 1 belt) then they will not line up properly. If single pulley then you need to get it spaced correctly to line up and clear. I have aluminum heads and a double pulley round back alternator that would not line up and clear the head. I went with the small 60 Amp Denso. It lines up and clears the head by about 1/32" on one of the cover bolts. I could grind it down for more but it wasn't needed for me. I also used my CVF Alternator brackets without the mount for the stock alternator, the tension rod bolted up to the Denso with a smaller bolt and shorter belt.