[Found!] Two rocker shaft hold down plates for a SB

-
Status
Not open for further replies.
SGBARRACUDA

SGBARRACUDA

ROY
Legendary Member
Joined
Dec 7, 2006
Messages
22,009
Reaction score
10,663
Location
PLANT CITY FL.
Rating - 100%
174   0   0
Contact seller
I am missing 2 of the narrower plates that the bolts go thru to retain the rocker arm shaft. And if possible the two different measurement lengths of the bolts that retain the shafts.
 
I quit using bolts, now I just buy allen set screws the length I need I can get them up to 3 or 4 in long. Screw them in the head and use a nut to pull the rocker shaft down straight.
 
I have 4. Shipping probably $4-5 if you want them for $10 I’ll send them.

image.jpg
 
Let me look, I might have a couple I can spare, just need the 2 plates and bolts? If I have them, just cover the cost of shipping.
 
brian6pac said:
I quit using bolts, now I just buy allen set screws the length I need I can get them up to 3 or 4 in long. Screw them in the head and use a nut to pull the rocker shaft down straight.
Click to expand...
That's a really good idea for hold downs, do you have to use a jam nut to keep them from backing off any? I've come to the conclusion that Fastenal is pretty much just Hobby Lobby for men...
 
Garrett Ellison said:
That's a really good idea for hold downs, do you have to use a jam nut to keep them from backing off any? I've come to the conclusion that Fastenal is pretty much just Hobby Lobby for men...
Click to expand...

I just use std grade 5 nuts, no locks because you don't want the stud screwing out of the head when you take it apart. Never had a problem with them coming loose.
 
Status
Not open for further replies.
-

Back
Top