Torsion Rod Adjuster Stuck

The bolt on the adjuster snapped so I can't release the pressure on the torsion bar. Basis for the whole operation is to get the K-member of the car and dismantle everything and resuable stuff to blasting & painting and not reusable stuff replaced by new or rebuilt stuff. Basically What I'm saving are K-member, upper & lower control arms and the old manual steering gear and center control arm. Thought I could use the strut rods but wrenching on it today most likely I will replace those as well. The OE 9" drums will be replaced by a Kelsey Hayes Disc set I have rebuilt, Bushings will be PolyUrethane, Swaybar will be added and so on.