My Dart Swinger Project!
OK
@Jadaharabi here are the pictures of the Wood Splitter/Tubing Bender we made up here at the shop that you were asking about.
Pictured Welder is what we did the welding work with.
Tubing Bending Jig that sets on the wood splitter.
Can see by the Degree Wheel that the Red 1 1/2" Pipe was bent at 15 degrees.
Bending Dies that we made up from raw stock.
There you go, nice to be able to do your own work building the tools.
Then using the tools to build the Dune Buggies and Whatever else you can dream up.
(Now back to DartFreak75 . . . Dart Build Project)
OK
@Jadaharabi here are the pictures of the Wood Splitter/Tubing Bender we made up here at the shop that you were asking about.
Pictured Welder is what we did the welding work with.
Tubing Bending Jig that sets on the wood splitter.
Can see by the Degree Wheel that the Red 1 1/2" Pipe was bent at 15 degrees.
Bending Dies that we made up from raw stock.
There you go, nice to be able to do your own work building the tools.
Then using the tools to build the Dune Buggies and Whatever else you can dream up.
(Now back to DartFreak75 . . . Dart Build Project)
