360 Magnum Pictures
We wanted to check our piston to valve clearance today. We took a couple of old lifters apart and made them solid. We just used some old aluminum tubing to make spacers. Spent very little time doing this, cut the tubing on the band saw. Cut a little long and belt sanded until it fit. As you can see by the "Very-Near calipers" they are about 1/2 inch long. this is 1/2 inch diameter tubing .040 wall.
We wanted to check our piston to valve clearance today. We took a couple of old lifters apart and made them solid. We just used some old aluminum tubing to make spacers. Spent very little time doing this, cut the tubing on the band saw. Cut a little long and belt sanded until it fit. As you can see by the "Very-Near calipers" they are about 1/2 inch long. this is 1/2 inch diameter tubing .040 wall.
