Help with Valvesprings and valve float. Noob

If you are going to switch, now is the time..........But a nice hardened shaft will fix it for cheaper then buying new shafts and rockers.

One more thought. Perfect 1.5 rocker arm ratio, on a solid can(so you don't have to question lifter bleed off) will NOT net you 1.5 X lobe lift. no matter what!
Take a look at the angle the pushrod is compared to the lifter itself. there is wasted motion that WILL waste some of you lift.
It's just the nature of the design.
Aka if it is more than 1.5......it's probably a 1.6 rocker(rocker ratios are not exactly the same between brands either.)
This is why B3RE kit is so nice.