[WANTED] Fibre washer

-
Status
Not open for further replies.
J

Joe (dad help)

Member
Joined
Feb 14, 2019
Messages
6
Reaction score
3
Location
Livingston Scotland
Rating - 0%
0   0   0
Contact seller
Hi is anybody willing to help a Scottish fellow mopar man
I am looking for a fibre washasher that sits behind the oil pump and before the front clutch of a 727 torqueflite its .102" thick and sadly the one I have has snapped into three pieces. There is a company that is willing to sell me the part for a very reasonable $2.53 But the carriage is $25.50 for a small part that weighs very little its a bit much tried to source here in the U.K. But everyone over here wants to sell a complete rebuild kit. I rebuilt the gearbox a couple of thousand miles ago must have nicked the washer upon rebuild So if anyone could help me out I would be very grateful.
Thanks Joe
 
Does this gasket in the picture look right?

33C8D31C-2BC0-4743-8626-94343EBEAD8F.jpeg
 
Found it, it would cost more for me to ship it than what they said.
 
Is there is a tranny shop near u? They should have a fiber washer kit. But then it may cost u more. Do u have any other trannies u could strip down. U can put a little thicker washer between the 2 drums so u wouldn’t need such a thick 1 at the pump. Kim
 
Could tape it to a post card and mail it for $1.50

For a letter check price group 5

upload_2019-10-7_9-58-51.png
 
Last edited:
69FBCuda said:
Could tape it to a post card and mail it for $1.50

For a letter check price group 5

View attachment 1715404845
Click to expand...
I would like to thank you for help but I have decided to purchase thrust washer kit that way I can replace them all and be secure in the knowledge that I should not have any problems touch wood
Once again thank you for your help
 
Status
Not open for further replies.
-

Back
Top