Looking for info on 2406782 rods

Roger. Just so you'll know......

Stock 360 bobweight is around 2150 grams. Changing to the KB's in a 360 is not as dramatic a change as on a 340, but you still drop the bobweight to around 2075 or 75 grams below stock. That is well outside the normal factory tolerance, which seems to have been in the +/- 25 to 30 gram range as best as we can know from reports.

Change to these lighter rods and the bobweight drops to around 2025 grams which is approximately 125 grams below stock. That is getting way out of line.

(FWIW.... All the numbers above are weighed and measured numbers, then computed for a standard 50% reciprocating weight factor, not any guessing. I use the word 'around' only because the exact numbers will vary a bit up and down across production tolerances.)


Thanks for the info and definitely good food for thought going into this next build.