gdizzle
Well-Known Member
Anyone know approximately what the distance from the road to the K member frame should be? Mine seems really low to the ground, and is scraping in some dips. I have 66 dart sedan with the slant. thanks
Help with frame height
- Thread starter gdizzle
- Start date
-
check FSM 67 lists some of those distances
Show us a picture. You can jack up the front end (use jack stands) and adjust the torsion bars with a 3/4" socket. I measure to the top of the wheel opening to get them even or 3/16- 1/4" higher on the drivers side to compensate for driver weight.
Jim Lusk
Well-Known Member
With the slant and slant torsion bars you probably want at least 1.5" between the lower control arm bumper and frame. Fenders could be off a bit so it is best to measure frame height to even the sides.
-
