[SOLD] Under dash wiring harness, very good condition

-
Status
Not open for further replies.

rms492

Well-Known Member
Joined
Mar 9, 2012
Messages
155
Reaction score
39
Location
CA
Rating - 100%
8   0   0
Contact seller
Have an under dash wiring harness, complete with bulkhead connector.
Appears to be in very good condition, I have no idea what car this came off nor what years it may have been used, but I had a 70 Dart (sold), so I may have gotten it from a donor car for my Dart.

Ships from: Pasadena, CA
Ships to: USA
Payment: PayPal preferred

80.00 shipped.

IMG_2536.jpg


IMG_2537.jpg


IMG_2538.jpg


IMG_2539.jpg


IMG_2540.jpg


IMG_2541.jpg


IMG_2542.jpg


IMG_2543.jpg


IMG_2544.jpg
 
Is there any way i can get a picture of the bulk head connector? I'm looking to see if it will fit a 69 Dart. Thanks, Steve
 
Your first picture almost shows the part number under the first row of connections. I went to my storage where the 69 is and measured the opening and it come to 2 3/8 X 2 13/16 roughly. The issue it need to look into is the location of that triangle on the bottom of the bulkhead connector. My firewall opening has the triangle on the side. I'm still researching but your harness may fit a B body.
I'll get back in touch. Thanks Steve
 
Okay thanks that makes sense as I had a 70 dart. I also remember getting many parts of a 71, way back in early 90s
 
Fyi and no offense, but that bulkhead connector looks like it should be swapped(couple toasted holes), which is easy enough to do. So changing from 71 to 69 would be easy I would think??
GLWS

Your first picture almost shows the part number under the first row of connections. I went to my storage where the 69 is and measured the opening and it come to 2 3/8 X 2 13/16 roughly. The issue it need to look into is the location of that triangle on the bottom of the bulkhead connector. My firewall opening has the triangle on the side. I'm still researching but your harness may fit a B body.
I'll get back in touch. Thanks Steve
 
Fyi and no offense, but that bulkhead connector looks like it should be swapped(couple toasted holes), which is easy enough to do. So changing from 71 to 69 would be easy I would think??
GLWS
I seen that also, but i haven't had time to look into the correct bulkhead connector.
 
Feel free to make any reasonable offer
Don't count me out. I'm also checking if the dash connector may look correct for my 69 dart.
Anyone have any input? What about aftermarket bulkhead connections? I'm in Bakersfield CA not to far to bring my dash to compare, if it works out.
 
Use your bulkhead connector. Or post a want ad for one.
Don't count me out. I'm also checking if the dash connector may look correct for my 69 dart.
Anyone have any input? What about aftermarket bulkhead connections? I'm in Bakersfield CA not to far to bring my dash to compare, if it works out.
 
Status
Not open for further replies.
-
Back
Top