Trick Flow small block heads

Duane said
I do not mean to criticize, but my thoughts for your situation is to consider what some others on this forum have been able to achieve with the eddies. Tony Santos has regular mid to high 10s, Pittsburgh racer has achieved high 9,s with the Edelbrock head. Seems to me you are nowhere near maxing out the performance of the heads you have because other system on your car are not ideal yet.
I would go over what you have and see if other parts of your combo need to be addressed first. $3,000 is a lot of coin to spend only to get a marginal improvement if any. But I have no first hand experience, and this is just mho.

Yah but how much money did they have into their Eddy's and who did it. I can assure you that the guy who did mine was nowhere near their skill level....I'm not 100 percent sure but I'd think that guys running 9s with eddy heads have probally gone as far as to have the pushrods relocated and using offset rockers.
I looked at what Hughes big mouth CNC costs, to get yah in or near the 300cfm mark and it gets pretty damn expensive..especially after shipping the heads from canada, to them and being shipped back. Not to mention the costs of using their rocker set up.