[WANTED] 73-76 A Body Big Bolt Upper Control Arms

-
Status
Not open for further replies.
I have a complete "K" member from a 74 Scamp. What else do you need?
 
mopars4life said:
Thanks, looking for a better deal on used sets. Don’t want to pay $200 a pair.
Click to expand...
You've been in this forum about as long as I have. Maybe you didn't see those threads about bent upper arms from wrecked cars, stripped threads at ball joint bungs, etc...
If you buy used, check them closely before spending time and money on them. Good luck
By the way... If you have a pair of known good small ball joint upper arms, the aftermarkets tapered adapter bushings for this larger spindle hole is the most affordable option.
 
My buddy used those spacers on his Demon. The ball joint stud is barely long enough to get the nut on flush with the bottom of the threads. I do know like the way that is. But that may be just me. Kim
 
Last edited:
oldkimmer said:
My buddy used those savers on his Demon. The ball joint stud is barely long enough to get the nut on flush with the bottom of the threads. I do know like the way that is. But that may be just me. Kim
Click to expand...
Thanks for the responses and advice. I don’t read everything here. I have another and plan to check whatever I get. Most folks I’ve dealt with are straight here. Only been burned one time by a member on Moparts. Hoping to find someone with two sets I can get together if possible, I know it’s a long shot.
 
Status
Not open for further replies.
-

Back
Top