Another straggler followed me home!

Yesterday I installed an A-body rad into the Ramcharger. It's a 318 rad but it is waaaayy smaller then the truck one was! Oh well, I made some little hangers and it will work for now. I fired it up but it was running rough and would not idle. I found a vacuum line on the pass side of the carb open. Plugged that and it is a bit better, though still not great. Idle screws were out about 2 1/2 turns. I started at 1 1/2 and am going to play with it today. It did run long enough to shift into reverse and then drive. Clunk both ways! Oil pressure is low on the factory gauge so I am going to hook up a mechanical and see the nitty gritty.