Lunati Retrofit Hydraulic Roller

67Cuda408 said

I’m wondering if anyone has any experience with Lunatis retrofit Roller vans for LA engines. If you look up the 20200711LK cam with lifter kit on summit it lists it as having a 3 bolt cam gear connection but then recommends a standard Mopar timing setup. Also I’ve read a few older threads on this forum where guys were claiming the snouts weren’t the correct length. Anyone have any more recent experience with these cams?

Click to expand...

I know this an older thread but I'll input my 3 year of experience with this exact cam, I didn't need a retrofit kit as my LA 360 was already a roller from factory. This is a very good cam, I've had little to no issues with it. Awesome mid-range. Great street cam, although a bit on the mild side.
I still use a mechanical fuel pump so no I did not have an issue with snout length. But again I just bought the cam itself, used the stock roller lifters and a Cloyes Double roller timing chain. As well as upgraded the valve springs, rockers etc.
I'm really thinking about bumping up to this cam: 20200712 Voodoo Retro-Fit Hydraulic Roller Cam - Chrysler 273-360 282/290
Which is what I should've done in the first place, especially with 9.7 compression.