No problem. From a magnum grab the cable, bracket spring and lever from the transmission (this all bolts onto a 727), and I also take the bracket off the throttle body. You have to modify the throttle body bracket to work with a carb, and fabricate a stud on the carb linkage to mount the upper end of the cable to. Make sure that the stud is positioned to give you proper travel (when the carb is at idle the tv lever on the trans should be all the way forward, pulled forward by the lower spring, there should be a little slack in the cable. At wide open throttle the tv lever on the trans should be pulled all the way back). Here is a pic of the upper end on mine.
View attachment 1715413397