Parts Sourcing for Front Suspension Rebuild

I need to do a follow-up here. When I put the front end together, I used the cheapest poly set I could find. These were the sort where all of the existing shells had to be re-used. Later I was able to get the front end set for the max positive caster I could get out of it. What I have less than 30 days afterwards is a popping noise and a wheel with too much negative camber. The poly bushings I installed about 10 years ago are disintegrating. They were okay for shuffling the car around with an eye-ball alignment. Not okay for a well tuned set-up, IMO. If someone were to offer me a set of Energy Suspension bushings, particularly a set that had to be built up using existing shells, I would say. "No thank you." I have used PST before with good results, new ones are on the way.