Decluttering the stock 318
This is what I did on my (318) '71 Dart GT.
Here is a picture of the factory original setup:
and a drawing of the original components, pulleys, and belts layout
I then purchased (from Ebay) another set of (altermator/AC compressor) brackets
and made some cuts.
I purchased another power steering belt (Federal PS pump) and installed it as shown
Here is the drawing of the modified components, pulleys, and belts layout
I then replaced the cut down (Ebay pruchased) front bracket. I used a small block chevy chrome alternator adjusting arm fit/cut to my needs
Here is what it looks like today(ish) with several thousand miles on it.