Doug Thorley Headers with SB Trick Flow Heads

j par said

Hey we live and learn. There's a lot of people who have absolutely great success with those Doug's headers. (Burger King) < (LOL voice command) people say how they don't touch anything and are easy to put in..
Of course I bought the 8-quart milodon Deep oil pan. Then when I had to cut my K frame dented all up to make it fit over the oil pump and that leaked from the factory well because according to their rap in California they can't use solve it anymore to test them.. as a matter of fact when he answered the phone and I told him what happened he quote said "not again!!"...
Live and learn I wouldn't buy one of those pile of crap pants again. Of course I get out here and everybody tells me well that's a known problem...

Click to expand...

Anyone buying a 8qrt pan isnt trying hard to be very stock or unmodified. That's point of buying/needing that pan, you're beyond stock. You have to lop off the pass side front corner and weld a flat pc. over it about 3 1/2 point to point to point triangle...then the drivers side where the sump is seamed...you have to, or should, cut a line where it pops out a hair...and then pop it in some with a mallet...and then weld that seam up... okay... now you are about ready, right after you..notch or drill a 3/4 hole or half moon from the pass side front sump baffle so that dip stick will go in straight and give you an accurate reading.

If the name is on a banner hanging on the wall of any race track... you're not in Kansas anymore...