Caliper bracket 73-74

-
Ma Mopar used 3 different length bolts, in mounting the caliper mount to the spindle, depending on what "bracket" was used for the caliper type of disc brakes. Slider type, pin type.
But diameter is 1/2 X 20.
I got a box full.
Ya, mailing to your country will will be a killer, even in a flat rate box, but if your willing to pay for the mailman, and something for the bolts, and my time going back and forth to the post office, i most likely can set you up.

You most likely have "Slider" type disc brakes, but a thin mount was used, and a thicker mount was used during the years.
Again, depends on the mount, for the length of the bolt, but the 2 inch one is probably the most common.

Caliper Mount Bolts 001 (Small).JPG


Caliper Mount Bolts 002 (Small).JPG
 
Last edited:
-
Back
Top