8 3/4 Oil seal?

DentalDart said

I had a spring pop out when I was cleaning my 3/8 3/4 and was given these guys when I got my car with the parts. I'm pretty sure they are the outer axle seals but am not quite sure how they go in and my seal puller I bought it having a hard time getting the other ones out.

I could probably use more force, I just am always worried about breaking **** when I take it apart without knowing how to actually do it... Maybe breaking it is how you learn...:rofl: Or asking the geniuses on FABO always seems to work as well . :thumbsup:

View attachment 1715420210

View attachment 1715420211

View attachment 1715420212

View attachment 1715420213

View attachment 1715420214

Click to expand...

Looking like you pretty much got it figured out.
That inner seal stops at a ridge in the tube that isn't quite a positive stop because it is tapered some, so slow and easy with the correct size driver gets those.

A little RTV around the inside of the tube where the seal bottoms is good, and I use my finger to spread a light film in there. (be careful of burrs or sharp edges)

I knocked the old seals out with a section of tubing and from inside the pumpkin.
Just set it inside the tube and reached it and smacked it.
(or a long section all the way through would work just as well.)

Just did a 8.75 recently.:D