66 Dart Cluster

Paul King said

removed my cluster today and their are four prongs on both side of the rear of the cluster that stick out were the plug in,s go .some are lose .will this be a problem for me when I reinstall this .I hope I described this okay. Thanks

Click to expand...

Yep most people will re-solder the pins back in to keep a good connection to the thin copper. I took mine apart and redid mine "white face" after re-soldering the pins I think there is a sticky on this board about it I also added a separate dedicated ground wire going to the ash frame to make sure I had a good ground instead of relying on the 4 screws to provide ground , you can see it in picture # 2