ID this housing please!

-
Jadaharabi said:
Hey I may be slow but then I'm old.
As for using this telephone on this thread I have found that I will reply at the end of the thread only to find that five other people have replied at the same time and are ahead of me.

So I know part of it is the time-space continual.
Click to expand...

We're both old and slow....but still moving forward.
 
RustyRatRod said:
NOT for the early B body. That's the giveaway. Theirs is a bolt pattern all by itself. The ends are completely different because of the tapered axles.
Click to expand...

You mean the 5 evenly spaced bolts with no flat side on the flange, yes?

searched 8.75 axle flange ends and didnt see anything that matched.

Thanks for the info!
 
Jimacuda said:
You mean the 5 evenly spaced bolts with no flat side on the flange, yes?

searched 8.75 axle flange ends and didnt see anything that matched.

Thanks for the info!
Click to expand...

Yes. You will not see anything that matches, because no one makes those ends anymore.
 
@DoctorDiff should get in here and look at this. The more I look at that thing, the more weird it gets.
 
It wasnt a "new housing end" search but yeah.
Didnt even find a picture that matched in a general image search for mopar 8.75.

Looks like its a cut down candidate for the next project.
Awesome. One less piece to find!
The parts collecting continues....
 
RustyRatRod said:
That's what I said. Perch to perch. Why would anybody be stupid enough not to measure from the center of each perch? Some things just go without sayin.
Click to expand...
I use a special Hyper-Galactic laser to measure mine.
It's accurate to within a billionth of an inch.
Give or take a trillionth.
 
You must log in or register to reply here.
-

Back
Top