Ok what was your favorite go too street strip hydraulic flat tappet cams from the 70s-80s. Mopar performance ect lift and duration.
Mine is the hemi street grind and 484.
Depends solely on the goal of the build. Your description is vague. Only because it means different things to different people. example;
1: Customer #1 states he wants a nice street strip cam (as they all do) and has a shift kit in the trans and 3.55’s on a small tire. At weighs 3500. He ends up with a Comp Cams 230/.480. (MP guys get ether the 280/.474 or the 284/.484.)
2: Same as above except the following: 3.91’s or better & gets a Comp 292H (MP get the Hyd. 292/.509 or a solid 296/.557)
I made good use with the 292/.509. Lots of squeeze and gear and it’ll go. I ran a manual 4spd. W/4.10’s.
