I have a stock stroke 360 thats barely over 10 to 1
Cam is a hair big, but its 260/264 on a 106. Its 565 lift. Drive it everywhere. Runs 11.20’s on pump gas at 3300 pounds
You have lots of compression and a 4 inch stroke crank. 4 inch cranks eat up a ton of cam duration. Your motor “ could” make 600 ponies and be a streeter. But not with that camshaft
That cam calls for a 115/ 325 spring. Thats for a really mild lobe. As an example mine needed 135-140. No requirements for break-in. Its mild
Not trying to dog ya, just leaving lots of power on the table with the compression and nice heads.
It will run fine the way it is. Enjoy.
