69 Cuda - Entire Electrical

I'd get on year ones mailing list and be patient. Every time theres a 30% off go buy a harness section. I did that to get all my wiring for both cars. Theres 3 main sections on the 69, along with 2 sub harnesses that M&H build. Ya sure doing it that way took a long time, but its plug n play, brand new, and OEM quality. You have to reuse your sub harnesses like console, light package and A/C or heat wiring for switch, blower resistor, and blower motor since nobody makes those. Sometimes tachometer harnesses are not part of the main harness. I know on 67 rally dash it's a seperate sub harness. The M&H comes only with the main hot feed wire that feeds the heat and A/C sub harness, you will have to clean and repin the sub harness to the new feed wire

Some more advice do NOT disconnect any of the accessory harnesses from the dash harness until you have the new dash harness. Then lay them side by side, disconnect and move the sub harnesses one wire at a time to the new harness, cleaning the connectors as you go.