[WANTED] Slant 6 power steering pump federal/trw style or newer style with brackets

-
Status
Not open for further replies.

Garrett Hurley

Active Member
Joined
Nov 18, 2019
Messages
43
Reaction score
42
Location
Torrance
Rating - 0%
0   0   0
Contact seller
Looking for a ps pump for 64 valiant 225 slant 6. Has ac if that matters. The pump I took of was trw and I can’t rebuild it so please don’t tell me I can just rebuild it. I would like to get a trw pump but I will take anything that would work, newer style pump with brackets, or federal style. You guys know better than me I’m only 17. Located in so cal. Pm me to discuss $$. Thanks guys new to the site I hope I did this right.

4FEB5104-AB0E-4FEA-8A6B-21DBD9C59740.jpeg
 
Welcome to FABO! These are some great people. Full of knowledge & some BS! Haha. I saw some on Ebay last week but they are a little pricey! There were a couple that looked like rebuildable cores for much less $$. I searched under Mopar TRW power steering pump.
 
Works..needs paint..1971 style off demon with /6

1575476038795856001402612117152.jpg


15754760663258148741636877895425.jpg
 
I have one still bolted to /6 out of 1/2 ton truck. Truck had a/c, compressor still on engine. can get photo in am.
I just got a pump but we’ll see how it works out it’s not in great condition I’ll get back to you if need be, appreciate the help bro
 
Ok so I got my pump on and car running again but there is some slack on the belt for the ps pump. Friends dad said there should be something to adjust the tension on the pump. I have a trw pump thanks to Roy sgbarracuda from Florida. If anyone knows if there is something I can adjust the tension with if not I’ll use the pulley off my old one and see if that helps just thought I’d see your guys thoughts before I take it off again.
 
Got it all figured out thanks to roy out in Florida for the pump got it bolted in and working good can pull out of parking spots with my pinky again.
 
Status
Not open for further replies.
-
Back
Top