I have a LOT of reassembly to do. The body is still on the rotiserie. The engine is rebuilt and wrapped. I can acces the crank bolt, so I rotate the engine once a month. The trans is rebuilt and stored. The differential is rebuilt and stored. The PS pump is rebuilt and stored. The LCAs are re-bushed, new tierod ends, etc. All steering links and knuckles are in place in the K and ready to be tightened and installed. Very little body work to be done. I replaced one rear lower quarter; otherwise very straight and rust free. I have sand blasted the entire underbody. I will apply an automotive primer and probably some kind of undercoat; leaning toward LizardSkin. After that, I think I'm pretty close to getting it back off the rotis and in the ground. That will be my big milestone.